The Sew Weekly Sewing Circle

My favorite store-bought dress is made out of knit fabric with an empire waist that hangs beautifully over my curves. I feel like I should be able to replicate this relatively simple design, however, it involves sewing with knit fabric. I've never done it before. Up until now it has been all cottons all the time. I can use all the advice I can get. Thanks!

Views: 281

Reply to This

Replies to This Discussion

I summarized some of my thoughts on sewing with knits here:

 

http://www.quixoticpixels.com/blog/2011/05/sewing-with-knits/

 

I hope that helps! Knits are great.

I sewed with knits a lot in college, but my stitching wasn't quite right back then - a lot of the stitches have broken where I've stretched the item over or around something, and I've got holes along the seamlines because I didn't use a ball point needle.

Recently, I decided it was time to conquer this problem, and I consulted my sewing machine manual.

SHORT stitch length (almost as short as it goes, if it's super-stretchy fabric), and yes, a slight zig-zag or special stretch stitch. Ball point needle, or very very very sharp/new needle if you don't want holes later. STRETCH while you sew. This used to mean that I'd guess at the seam allowance, and sometimes take way too much. Now I DRAW the seamline on the fabric with chalk or water-erasable marker. Much better. PRESS your hems, because you'll need to stretch it while you sew, and you can't just hope you've folded over the right amount.

For super-stretchy fabrics, you may want to widen the stitch width a little more, and shorten the stitch length even more. Tried this recently with a slinky-slippery knit, and it totally worked. No more lettuce edge! I also played with the tension a bit to get the hems just right. For that, I recommend trying it on a scrap until it looks right. (All on a conventional machine, by the way. I have an overlocker, love it, but I tend not to sew seams with it. Plus, you can't sew a dart with a serger - not unless you're absolutely sure it's where you want it.)

If you're gathering anything, I suggest basting the gathers in place as you want them to look before you sew the seam. Having to stretch the seam while you sew can distort gathers.

I keep rereading this thread for moral support. I am so close to giving up on my latest project- I keep having the thread break about every 5 inches or so. The bodice on my dress is complete, but with the 5 inch issue, I am dreading sewing the skirt panels.  I really think my machine just doesn't like silky knit- I have sewn dozens of t-shirt knit outfits for dolls, but this is not reacting the same way at all.  

For thread breaks have you changed the needle recently to a new (ball point)one? also try totally re threading the machine.

Trouble shooting breaking threads  I found this site through my quilting activities on line and the information is all totally valid for whatever machine sewing you are doing.

RSS

© 2024   Created by Mena Trott.   Powered by

Badges  |  Report an Issue  |  Terms of Service